29
2020/09
Solutions for Noise Generated by Z-Type Elevators
The Z-type elevator is a material-handling device that can be widely used in various applications requiring gentle handling. It is now employed across numerous industries and is highly regarded by users. Today, we will introduce the causes of noise in Z-type elevators and the corresponding solutions.
Z-shaped elevator It is a material-handling device that can be widely used in various environments requiring gentle handling; currently, Z-shaped elevator It has already been widely adopted across various industries and is highly favored by users. Today, we’ll introduce the causes of noise in Z-type elevators and their corresponding solutions!
1. Motor noise. Motor noise is quite normal; when the stator and rotor come into contact, a harsh “scratching” or “rattling” sound may occur. This is often caused by bearing failure, in which case the motor should be shut down immediately to inspect the bearings for damage. In most cases, the issue stems from damaged bearings. If no damage is found, check whether the inner or outer race of the bearing is worn; if so, the race can be bushed or the bearing and end cover replaced. Additionally, some bearings require routine maintenance: severe oil starvation can lead to noise, which can be resolved by replenishing the lubricant.
2. Bearing noise. Generally, “bearing noise” refers to noise emanating from the housing rather than the motor itself. This type of noise typically arises from one of two situations: first, the bearing has not been properly maintained or lubricated for an extended period, leading to rust and corrosion on the equipment; in such cases, simply replenishing the lubricant is sufficient. Second, the bearing may be damaged—most commonly due to cracks in the internal rolling elements. In this scenario, the damaged rolling elements must be replaced. It is also possible that other internal components of the bearing are damaged, in which case those components should be replaced as well.
3. Chain noise. Wear on the chain and sprockets can also generate noise during operation; this is a normal occurrence in use. Excessive chain slack, inadequate lubrication, or an oversized chain pitch can all adversely affect chain performance. In such cases, applying appropriate lubricant can help prevent these issues. Additionally, it’s important to consider environmental factors: if the ambient humidity is high, stainless steel chains are a suitable choice.
4. Noise caused by material falling. This occurrence is relatively rare and typically happens when material drops into the hopper or during feeding, landing inside the housing. In such cases, it is necessary to check whether the feed rate is too high, causing the hopper to become fully loaded and resulting in material falling into the housing during operation, thereby generating noise. To address this issue, the feed should be maintained at a constant, uniform rate so that the equipment operates within its rated conveying capacity, avoiding overloading and potential damage to the machinery.