28
2020/09
Overview of Z-Type Bucket Elevator Products:
The Z-type bucket elevator is a combined conveying and lifting device that integrates horizontal material transport with vertical lifting; it derives its name from the Z-shaped configuration of its inlet and outlet ports. A single unit can replace the conventional setup consisting of three separate pieces of equipment—horizontal conveyor, vertical elevator, and another horizontal conveyor. Other common names include: rotary bucket elevator, induced-bucket elevator, Z-type elevator, Z-type feeder, Z-type bucket conveyor, C-type elevator, C-type feeder, C-type bucket conveyor, S-type elevator, chain-bucket elevator, and bucket elevator.
Z-type bucket elevator Product Overview:
Z-type bucket elevator It is a conveying and lifting device that integrates horizontal material conveyance with vertical lifting, named for its Z-shaped configuration based on the relative positions of the inlet and outlet. A single unit can replace the conventional setup of three separate pieces of equipment—horizontal conveyor, elevator, and another horizontal conveyor. Other common names include: bucket-turning elevator, induced-bucket elevator, Z-type elevator, Z-type feeding machine, and Z-type bucket elevator. Type C Elevator , C-type feeder, C-type bucket elevator, S-type elevator, chain-bucket elevator, and bucket elevator.
The machine housing is modular and sectional, with customizable horizontal length and lifting height, offering flexible layout, minimal footprint, reduced plant space requirements, and shallower pit depths. The equipment operates safely and reliably, with smooth, noise-free performance, no material spillage or leakage, zero dust emissions, and easy disassembly and maintenance—making it an ideal next-generation material-handling solution.
Z-type bucket elevator The operating principle of the conveying system:
Material enters the hopper through the feed inlet and is lifted to the top by the conveyor chain. After passing over the top pulley, the chain reverses direction and the material is discharged into the receiving trough via a Z-type bucket elevator. Belt-driven bucket elevators typically use rubber belts, which are mounted on drive drums at the bottom or top and on return drums at the top and bottom. Chain-driven Z-type bucket elevators generally have two parallel drive chains, with a pair of drive sprockets at the top or bottom and a pair of return sprockets at the bottom or top. Bucket elevators are usually equipped with a casing to prevent dust from escaping during operation.
Z-type bucket elevator The standard configuration includes a torque limiter. When a metal hopper is used, if the machine becomes jammed, it will stop rotating and the alarm light will illuminate, thereby preventing accidents and ensuring safe and reliable operation. The bucket-rotating elevator operates within a closed casing, using buckets suspended from a chain to convey materials in a horizontal–vertical–horizontal sequence. It allows for single-point or multi-point feeding and, with a specially designed discharge mechanism, enables single-point or multi-point unloading. The system is fully enclosed, leak-free, and pollution-free, making it ideal for feeding and conveying various powdered and granular materials—particularly non-sticky substances. Its greatest advantages are its flexible configuration, low material breakage rate, and ability to eliminate the production of defective products.