PROJECT CENTER

CHANGHONG

How about the moisture-proof effect of Z-type bucket elevator? How is it done


Published:

2021-09-15

Z-type bucket elevator is also called Z-type rotary bucket elevator. Z-type bucket elevator has a wide range of applications and is suitable for various industries. It is used in many industries such as food, chemical, pharmaceutical, metallurgy, quartz sand, etc.

Z-type bucket elevator is also called Z-type rotary bucket elevator. Z-type bucket elevator has a wide range of applications and is suitable for various industries. It is used in many industries such as food, chemical, pharmaceutical, metallurgy, quartz sand, etc. , The reason why the Z-type hoist was chosen is because it has the advantages that other equipment does not have, and the sealing is relatively good, which can avoid the damage of some materials.

Some users said that they want to buy this kind of equipment, but they don't know how the Z-type bucket elevator has moisture-proof effect, so I will introduce it to you today.

1. The whole machine is sealed. The box body encloses the chain and the hopper inside, and the material enters the box body during transportation, so there is no need to worry about the material being damp during transportation. In addition, for ordinary users, the environment is not so humid, so don't worry about this in a dry environment , There are also some users whose materials are more moist. At this time, stainless steel can be used, so that equipment damage can be well prevented. Stainless steel has better corrosion resistance.

2. Internal structure. There is a slider inside, and this slider is made of nylon. Its most prominent advantage is that its abrasion resistance is higher than all other fibers, 10 times higher than cotton, 20 times higher than sheep's draft, and slightly in blended fabric. Adding some polyamide fibers can greatly improve its abrasion resistance. When stretched to 3-6%, the elastic recovery rate can reach 100%, and it can withstand tens of thousands of times of bending without breaking. This kind of material does not have to worry about being damp. Because the life span is relatively long.

3. The bearing is moisture-proof. The installation of the bearing must be carried out in a dry and clean environment. The mating surface of the shaft and the housing, the end face of the shoulder, the groove and the connection surface should be carefully checked before the installation. The bearing will encounter more moisture in the air. At the same time, it is best to apply more lubricating oil. In addition, we can use stainless steel bearings, which are more durable.