Selection and introduction of Z type hoist
Hengshui Changhong Rotary Bucket Conveyor (referred to as the bucket) is a conveyor that uses two special chains for special materials as traction components. The two sides of the hopper are fixed on the chains and arranged continuously, and are loaded by inflow, and are automatically turned over and unloaded at low speed.
Hengshui Changhong Rotary Bucket Conveyor (referred to as the bucket) is a conveyor that uses two special chains for special materials as traction components. The two sides of the hopper are fixed on the chains and arranged continuously, and are loaded by inflow, and are automatically turned over and unloaded at low speed. Its name: rotating bucket elevator, Z type elevator, Z type feeder, Z type bucket elevator, C type elevator, C type feeder, C type bucket elevator, S type elevator, T Type hoist, no-breaking hoist, zero-breaking hoist, multi-point feeding hoist, multi-point unloading hoist, packing machine matching hoist, color sorting machine matching hoist, the conveying material temperature can reach 600 degrees.
1. Hopper: In order to meet customer needs, there are diversified materials such as nylon, ABS, PP, stainless steel 304, stainless steel 316L, stainless steel 310, carbon steel and so on. Our rotary bucket conveyor machinery conveyor chain adopts large pitch self-lubricating roller conveyor chain. Thus, the friction loss of the chain in use is reduced, the service life of the chain is prolonged, and the maintenance and replacement cost is reduced. Case: The whole machine can adopt carbon steel cold plate electrostatic spraying or stainless steel structure
2. Applicable industries: This machine is suitable for conveying dusty, granular, small and medium-sized materials, and is used in the food industry, agricultural and sideline products, chemical medicine, activated carbon, building energy, environmental protection, refractory materials, military industry and other fields
3. Conveying type: The bucket conveyor conveys materials in a closed body. The materials are conveyed through the hopper suspended on the chain. The modular design can realize a wide range of configurations and can be combined horizontally, vertically and horizontally. Such as Z type, C type, E type, L type, R type can also multi-point feeding, multi-point unloading, the whole machine is fully sealed, pollution-free, leak-free, neat and clean, and the composition is flexible, which can be used in small Vertical and horizontal transportation is carried out in the space, making the transportation machinery easy to install and modify. Even if the equipment is designed with multiple feed points and discharge points, the bucket elevator requires only one drive, which is equivalent to saving a lot of money in the control system and energy consumption, reducing the number of maintenance for the entire production system, and greatly Improved production capacity.
4: No leakage overlapping hopper
Feeding is carried out in the horizontal section, all hoppers are overlapped and connected, supplemented by the feeding port, to ensure the best state of hopper loading.
5: easy to install
Our hoists have been transported to our customers in modules. Customers can choose to install independently, and finally our technicians will go to the site to check the quality of the installation. You can also choose to have us complete the installation and commissioning of the entire equipment.
6: easy maintenance
Our products use high-quality components to ensure stable performance during equipment operation. All our modules can be opened and connected for easy maintenance. Under the equipment
Flat-mounted drawers are easy to clean and wash. All inner walls are smoothly designed to prevent dust accumulation. All bearings are installed externally for easy maintenance. Our R series bucket elevators are equipped with torque limiters, backstop protectors and flexible tensioning devices to ensure stable and safe operation of the equipment.