13
2020/09
How to select the model of a Z-type bucket elevator?
The Z-type bucket elevator is a commonly used lifting equipment that can be configured for single-point or multi-point feeding and discharging. It is available in a variety of models and specifications. So how should you select the appropriate model of Z-type bucket elevator? This article will provide a detailed introduction on this topic.
Z-type Bucket Elevator It is a common type of elevator equipment that can perform single-point or multi-point feeding and discharging. It comes in a variety of models and specifications. So how should one select the appropriate model of a Z-type bucket elevator? This article will primarily provide an overview:
1. Material Properties
Different materials exhibit varying properties, such as moisture content, temperature, viscosity, and abrasiveness. Depending on these material characteristics, Z-type bucket elevators can be equipped with different bucket designs and materials: deep buckets are typically used for bulk materials, while stainless steel bodies or buckets are preferred for corrosive or high-temperature materials. For materials in the food industry, the buckets of our Z-type bucket elevators must be made of plastic.
2. Conveying Distance
Z-type Bucket Elevator Horizontal–vertical–horizontal combined conveying is possible; however, the Z-type bucket elevator model selected will vary depending on the lift height. The higher the lift, the greater the drive power required, so this factor must be taken into account when making your selection.
3. Required unit output
Z-type Bucket Elevator The greater the production output, the larger the conveyor model that should be selected; moreover, as the conveying capacity increases, the bucket speed will also increase accordingly. If the production rate is not properly matched with the conveyor model, it can shorten the equipment’s service life and increase operating costs.
4. Operating Environment
Z-type Bucket Elevator With its flexible configuration and low material breakage rate, it is currently widely used for feeding in weighing and packaging machines, color sorters and re-sorting systems, three-dimensional cyclic loading and unloading in automated production lines, and multi-point feeding in fully automatic weighing and batching systems.