04
2021/01
An Introduction to Bucket Elevator Components
Most people are not very familiar with bucket elevator components. Today, we’ll provide a brief overview of these components, hoping it will be helpful to you.
Most people are not very familiar with bucket elevator components. Today, we’ll provide a brief overview of these components, hoping it will be helpful to you.

Bucket elevator components include: plate-chain bucket elevator chains, buckets, head pulleys, and tail pulleys; as well as round-link bucket elevator chains, buckets, head shafts, tail shafts, chain hooks, and other parts. The common bucket elevator components are summarized as follows:
1 1. Chains: round-link chains and bucket elevator plate chains.
2 1. Sprockets: belt-type bucket elevator sprockets, chain-type bucket elevator sprockets, and plate-chain bucket elevator sprockets.
3 1. Hoppers: plastic buckets for belt bucket elevators, chain bucket elevators, and plate-chain bucket elevators.
4 1. Chain Hooks: Elevator chain hooks are widely manufactured from low-carbon steel and carbon alloy steel. The primary function of elevator chain hooks is to connect the hoisting mechanism to the load.
When operating a bucket elevator, it is essential to carry out regular inspection and maintenance. Proper and timely maintenance will ensure the equipment’s reliable performance. Next, let’s briefly review the key precautions to observe during elevator operation:
1 The key to the power switch box must be kept and managed by a designated person, and the bucket elevator must be maintained and managed by qualified personnel.
2 , a hoist limiter and a travel limit switch are required; the limiter must prevent the pulley from being hoisted to within a specified distance of the drum or another pulley. 300mm It used to stop automatically.
3 1. A clear overload indicator shall be provided, and the load must not exceed the rated capacity during lifting and lowering operations.
4 After power is supplied, the system equipment must be inspected promptly, and a test lift operation must be performed.
5 1. Before lifting or lowering the bucket elevator, a bell must be rung as a warning.
6 1. The hoist is not permitted to carry personnel for ascent or descent, and the hoisting area and its surroundings must be kept clean and tidy.
7 Note that the power supply must be disconnected only after the hoist has completed its operation and the suspended platform has been lowered to the ground, and the upper and lower guardrail doors must be securely closed.
8 1. Master the correct operating procedures for bucket elevators, and promptly report and effectively resolve any issues that arise during operation.
Previous: