imgboxbg

NEWS  CENTER

昌弘矿山机械

Do you know how to maintain a crushless hoist?

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2020-10-07
  • Views:0

(Summary description)The non-breaking hoist is a machine currently used in many industries. This kind of machine uses a chain to transport items. It has a great effect on the production of items. How much do you know about this kind of non-breaking hoist? Do you know how to maintain a crushless hoist? Let's take a look now!

Do you know how to maintain a crushless hoist?

(Summary description)The non-breaking hoist is a machine currently used in many industries. This kind of machine uses a chain to transport items. It has a great effect on the production of items. How much do you know about this kind of non-breaking hoist? Do you know how to maintain a crushless hoist? Let's take a look now!

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2020-10-07
  • Views:0
Information

  The non-breaking hoist is a machine currently used in many industries. This kind of machine uses a chain to transport items. It has a great effect on the production of items. How much do you know about this kind of non-breaking hoist? Do you know how to maintain a crushless hoist? Let's take a look now!

      First look at the working principle of non-breaking lifting: the hopper draws material from the warehouse below, and then lifts it upwards together with the conveyor belt or chain. After bypassing the auxiliary and upper wheels, turn down, and the bucket elevator pours the material into the holding tank. The transmission belt of the bucket elevator with transmission usually uses rubber bands, which are installed on the electric drum below or above and the steering drum above or below.

    Chain-driven bucket elevators are usually equipped with two parallel drive chains, with a pair of drive sprockets above or below, and a pair of direction changing sprockets below or above. Bucket elevators are usually equipped with a shell to prevent the bucket elevator from raising dust.

    The safe and correct use of the non-crush elevator can prevent malfunctions during use, and ensure the normal use of the bucket elevator through regular maintenance. Therefore, the machine should be maintained as follows:

   (1) Regularly carry out lubrication management, apply lubricating oil to the unbroken elevator drive chain and the bearings of the transmission part, reduce the wear of each part of the equipment, and extend the life of the unbroken elevator.

   (2) Remove the accumulated materials and debris from the tail of the elevator that does not break regularly, keep it clean, prevent the material from squeezing, and when transporting the material, it is inevitable to accumulate the materials of each part of the elevator that do not break. At this time, we must clean the materials in time. If the accumulation of later materials is not cleaned, it will not only affect the normal use of the elevator that does not break, but also corrode some parts of the elevator that does not break, causing damage.

   (3) Regularly check the flow rate in the reducer, and pay special attention to the regular replacement of the flow rate for the continuously working reducer. When the temperature rises above 60 degrees or the oil temperature exceeds 85 degrees during use, the lubricating oil should be replaced before use. Because if the oil is not replaced for a long time, the oil will deteriorate or its efficiency will be greatly reduced, which will affect the normal use of the elevator that does not break.

   (4) The tension of the transmission chain should be adjusted regularly to keep the tension of the two transmission chains consistent and improve the efficiency of the machine.

      The above is about the maintenance of the non-crushing elevator, so that the elevator can be used for a longer time, and the effect can be better.

 

Keyword:

Scan the QR code to read on your phone

HOT LINE: 

Contact: Manager Pang
Phone:
+86-13932836877, +86-15832856785,

+86-13315840327
Tel: +86-318-4869777
Fax: +86-318-4868277
E-mail: 384023722@qq.com
Add: West Of Nanxiao Road, Matou Town,

Hengshui City, Hebei Province, China

MOBILE SITE

Copyright © 2020 Hengshui Chang Hong Mining Machinery Co., Ltd.  All Right Reserved  冀ICP备13014199号-1