imgboxbg

NEWS  CENTER

昌弘矿山机械

Features of Z-type bucket elevator

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2020-09-07
  • Views:0

(Summary description)Z-type bucket elevator: suitable for lifting from low to high, the supplied material is put into the hopper through the vibrating table and the machine automatically runs continuously and upwards. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. The hopper is Landa Designed and manufactured by General Machinery Factory, PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. It is designed for supporting vertical packaging machines and computer measuring machines. It is suitable for quantitative bucket lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products. Signal recognition to control the automatic stop and start of the machine.

Features of Z-type bucket elevator

(Summary description)Z-type bucket elevator: suitable for lifting from low to high, the supplied material is put into the hopper through the vibrating table and the machine automatically runs continuously and upwards. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. The hopper is Landa Designed and manufactured by General Machinery Factory, PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. It is designed for supporting vertical packaging machines and computer measuring machines. It is suitable for quantitative bucket lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products. Signal recognition to control the automatic stop and start of the machine.

  • Categories:Industry trends
  • Author:
  • Origin:
  • Time of issue:2020-09-07
  • Views:0
Information

   Bucket elevators are divided into Z-type bucket elevators and C-type bucket elevators according to the positions of the feed and discharge ports. According to the number of discharge ports, it is divided into: single-point discharge hopper elevator and multi-point discharge hopper elevator. The discharge point can be set freely, and the equipment automatically completes the blanking control.

  Z-type bucket elevator: suitable for lifting from low to high, the supplied material is put into the hopper through the vibrating table and the machine automatically runs continuously and upwards. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. The hopper is Landa Designed and manufactured by General Machinery Factory, PP non-toxic hopper makes this type of bucket elevator more widely used. All sizes are designed and manufactured according to actual needs. It is designed for supporting vertical packaging machines and computer measuring machines. It is suitable for quantitative bucket lifting and feeding of food, medicine, chemical industrial products, screws, nuts and other products. Signal recognition to control the automatic stop and start of the machine.

   Performance characteristics

   Features of Z-type bucket elevator:

   1. The driving power is small, and it adopts inflow feeding and induced unloading.

   2. The lifting range is wide. This type of lifting machine has less requirements on the types and characteristics of materials, and can not only lift general powdery and small granular materials. Moreover, it can upgrade materials with greater abrasiveness, with good sealing performance and less environmental pollution.

   3. Good operating reliability, advanced design principles and processing methods ensure the reliability of the whole machine operation, the failure-free time exceeds 20,000 hours, the lifting height is high, and the hoist runs smoothly, so a higher lifting height can be reached.

   4. Long service life, seldom squeezing and collision between materials, this machine is designed to ensure that materials are rarely scattered during feeding and unloading, which reduces mechanical wear.

 

Keyword:

Scan the QR code to read on your phone

HOT LINE: 

Contact: Manager Pang
Phone:
+86-13932836877, +86-15832856785,

+86-13315840327
Tel: +86-318-4869777
Fax: +86-318-4868277
E-mail: 384023722@qq.com
Add: West Of Nanxiao Road, Matou Town,

Hengshui City, Hebei Province, China

MOBILE SITE

Copyright © 2020 Hengshui Chang Hong Mining Machinery Co., Ltd.  All Right Reserved  冀ICP备13014199号-1